2.2KW Water Cooled Spindle Kit CNC Milling Spindle Motor 2.2KW VFD 80mm Clamp Water Pump Water Pipe 13pcs ER20

Description

Package include:

1 x 2.2KW CNC Water Cooled Spindle Motor

1 x 2.2KW/220V VDF

1 x 3.5M Water Pump

1 x 5M Water Pipes ( Inside Diameter 6mm , outside Diameter 8mm )

1 x 80mm Spindle Clamp

13 x ER20 Collet size :(1,2,3.175,4,5,6,7,8,9,10,11,12.7,13mm)

Feature:

1. 2.2kw Water-cooled spindle motor engraving milling grind 80x230mm

Specification:

Size:80x230mm(Middle body diameter:80mmxLength:230mm)

Power:2.2Kw

Voltage:220VAC

Frequency:0-400Hz

Speed:10-24000rpm

Water Cooling ER20 collet chunk

Runout off:less than 0.05mm

Germany SKS 4pcs bearing

Grease Lubrication

2. Variable Frequency Drive VFD Inverter 2.2KW 3HP 220VAC

1)PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;

2)Easy PLC function can realize 16 legs of speed and inverter control function;

3)RS485 communication port, adopting standard international MODBUS main circuit control;

4)With extremely strong anti-jamming capability

5)Low output ratting torque0.5HZ-150%, low speed running ability;

6)Carrier adjustable by 16KHZ, completely soundless working environment;

7)Broad voltage working area, normal running in 304V-456V;

8)Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;

9)Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;

10)With perfect error protection and short circuit starting protection capability;

Tech parameters:

1) Input Voltage: 220V( /-15%) ,We also stock 380V( /-15%), please contact us

for item stock.

2) Output Voltage 110V AC or 220V AC

3) Input Frequency: 48-63 Hz

4) Output Frequency: 0-400 Hz

5) Input Phase: 1 or 3 phase

6) Output Phase: 3 phase

7) Warranty: 1 year from the date you purchased

the parameter of the inverter is :

PD005=400
PD004=400
PD003=400

How to connect:

The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number ??1.2.3.4 ??

on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.